Descargar Power Translator 15 Full Crack Serial !NEW!

Descargar Power Translator 15 Full Crack Serial !NEW!

LINK https://tinurll.com/2t7mPU

Eaton's SMP Gateway combines all the functions required by modern automation systems including innovative functionality, high reliability and scalability in a single powerful package. In addition to providing data concentrator, protocol translator and logic processor functions, the SMP Gateway features an integrated HMI and facilitates secure remote access for maintenance to substation and field devices, reducing operating costs and increasing productivity. The SMP Gateway is one of Eaton's grid automation system solutions.

Electron is an amazing shell developed by Github utilizing the awesome power of both the NodeJS and Chromium APIs into a single runtime harnessing web based programming languages into beautifully packaged desktop apps.

ASE provides a comprehensive product for utility protocol testing with its PC-based protocol test solution. The ASE2000 RTU Testset is a full-featured protocol test system that provides the user with a powerful and flexible tool for testing and maintaining SCADA RTU and SCADA IED equipment and diagnosing communication problems. With support for DNP3, IEC60870-5-101, IEC 60870-5-104, and 80+ protocols, it is by far the most comprehensive Testset available. It supports Windows 10, 11 and legacy Windows (Windows 7, 8, XP (SP2, SP3), Vista).

The ASE2000 RTU Testset is a full-featured DNP3 protocol simulator, IEC 60870-5-104 protocol simulator, IEC 60870-5-101 protocol simulator, 80+ Legacy protocol simulators, and test set, which provides the user with a powerful and flexible tool for testing and maintaining SCADA RTU and SCADA IED equipment and diagnosing communication problems.

U-Boot 1.1.4 (Jan 26 2013 - 13:35:40)ap135 - Scorpion 1.0DRAM: sriScorpion 1.0ath_ddr_initial_config(178): (32bit) ddr2 inittap = 0x00000003Tap (low, high) = (0x3, 0x1f)Tap values = (0x11, 0x11, 0x11, 0x11)128 MBFlash Manuf Id 0x1c, DeviceId0 0x30, DeviceId1 0x17flash size 8MB, sector count = 128Flash: 8 MBUsing default environment*** Warning *** : PCIe WLAN Module not found !!!In: serialOut: serialErr: serialNet: ath_gmac_enet_initialize...athrs_sgmii_res_cal: cal value = 0xeNo valid address in Flash. Using fixed addressNo valid address in Flash. Using fixed addressath_gmac_enet_initialize: reset mask:c02200 Scorpion ----> S17 PHY *Vlan config...TEST: FINAL REG VAL after TX Calibration - 0x46000000TEST: FINAL XMII VAL after RX Calibration - 0x56000000TEST: FINAL ETH_CFG VAL after RX Calibration - 0x00028001athrs17_reg_init: complete: cfg1 0x80000000 cfg2 0x7335eth0: ba:be:fa:ce:08:41eth0 upathrs17_reg_init_wan doneSGMII in forced modeathr_gmac_sgmii_setup SGMII done: cfg1 0x800c0000 cfg2 0x7214eth1: ba:be:fa:ce:08:41eth1 upeth0, eth1Setting 0x18116290 to 0x54a9214fAutobooting in 1 seconds## Booting image at 9f020000 ... Uncompressing Kernel Image ... OKStarting kernel ...Booting QCA955x\00Linux version 2.6.31--LSDK-9.2.0_U6.616 (root@localhost.localdomain) (gcc version 4.3.3 (GCC) ) #1 Sat Jan 26 13:40:17 CST 2013Ram size passed from bootloader =128Mflash_size passed from bootloader = 8CPU revision is: 00019750 (MIPS 74Kc)cpu apb ddr apb ath_sys_frequency: cpu 720 ddr 600 ahb 200Determined physical RAM map: memory: 08000000 @ 00000000 (usable)Zone PFN ranges: Normal 0x00000000 -> 0x00008000Movable zone start PFN for each nodeearly_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00008000Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512Kernel command line: console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ath-nor0:128k(u-boot),1024k(kernel),6912k(rootfs),64k(config),64k(ART) mem=128MPID hash table entries: 512 (order: 9, 2048 bytes)Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytesWriting ErrCtl register=00000000Readback ErrCtl register=00000000Memory: 112868k/131072k available (1889k kernel code, 18028k reserved, 435k data, 120k init, 0k highmem)NR_IRQS:128plat_time_init: plat time init doneCalibrating delay loop... 359.42 BogoMIPS (lpj=718848)Mount-cache hash table entries: 512****************ALLOC*********************** Packet mem: 802774e0 (0xe00000 bytes)********************************************NET: Registered protocol family 16ath_pcibios_init: bus 0***** Warning PCIe 0 H/W not found !!!registering PCI controller with io_map_base unsetath_pcibios_init: bus 1ath_pcibios_init(232): PCI 1 CMD write: 0x356registering PCI controller with io_map_base unsetReset button pressed.bio: create slab at 0pcibios_map_irq: IRQ 76 for bus 1NET: Registered protocol family 2IP route cache hash table entries: 1024 (order: 0, 4096 bytes)TCP established hash table entries: 4096 (order: 3, 32768 bytes)TCP bind hash table entries: 4096 (order: 2, 16384 bytes)TCP: Hash tables configured (established 4096 bind 4096)TCP reno registeredNET: Registered protocol family 1ATH GPIOC major 0squashfs: version 4.0 (2009/01/31) Phillip Loughermsgmni has been set to 220Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)io scheduler noop registeredio scheduler deadline registered (default)Serial: 8250/16550 driver, 1 ports, IRQ sharing disabledserial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550Aconsole [ttyS0] enabledPPP generic driver version 2.4.2NET: Registered protocol family 245 cmdlinepart partitions found on MTD device ath-nor0Creating 5 MTD partitions on "ath-nor0":0x000000000000-0x000000020000 : "u-boot"0x000000020000-0x000000120000 : "kernel"0x000000120000-0x0000007e0000 : "rootfs"0x0000007e0000-0x0000007f0000 : "config"0x0000007f0000-0x000000800000 : "ART"->Oops: flash id 0x1c3017 . TCP cubic registeredNET: Registered protocol family 10NET: Registered protocol family 17802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller athwdt_init: Registering WDT successath_otp_init: Registering OTP successVFS: Mounted root (squashfs filesystem) readonly on device 31:2.Freeing unused kernel memory: 120k freedinit started: BusyBox v1.01 (2012.11.27-00:48+0000) multi-call binaryThis Board use 2.6.31xt_time: kernel timezone is -0000nf_conntrack version 0.5.0 (2048 buckets, 8192 max)CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please usenf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option orsysctl net.netfilter.nf_conntrack_acct=1 to enable it.ip_tables: (C) 2000-2006 Netfilter Core Teaminsmod: cannot open module `/lib/modules/2.6.31/kernel/iptable_raw.ko': No such file or directoryinsmod: cannot open module `/lib/modules/2.6.31/kernel/flashid.ko': No such file or directoryPPPoL2TP kernel driver, V1.0PPTP driver version 0.8.3insmod: cannot open module `/lib/modules/2.6.31/kernel/harmony.ko': No such file or directory (none) mips #1 Sat Jan 26 13:40:17 CST 2013 (none)(none) login: qca955x_GMAC: Length per segment 1536955x_GMAC: qca955x_gmac_attach955x_GMAC: qca955x_set_gmac_capsCurrently in polling mode unit1mac:1 Registering S17....qca955x_GMAC: RX TASKLET - Pkts per Intr:200qca955x_GMAC: Max segments per packet : 1qca955x_GMAC: Max tx descriptor count : 220qca955x_GMAC: Max rx descriptor count : 220qca955x_GMAC: Mac capability flags : 12002200955x_GMAC: qca955x_gmac_attach955x_GMAC: qca955x_set_gmac_capsCurrently in polling mode unit0mac:0 Registering S17....qca955x_GMAC: RX TASKLET - Pkts per Intr:200qca955x_GMAC: Max segments per packet : 1qca955x_GMAC: Max tx descriptor count : 220qca955x_GMAC: Max rx descriptor count : 220qca955x_GMAC: Mac capability flags : 10002A00955x_GMAC: Serdes PLL is locked value 0x1f038116athr_gmac_ring_alloc Allocated 3520 at 0x87950000athr_gmac_ring_alloc Allocated 3520 at 0x87a8e000955x_GMAC: eth1 in SGMII MODEScorpion -----> S17 PHYACL is not yet enabled. Enabling... Hello, nat helper module for 1.08!netlink_kernel_create succeeded at tp_rule_nl_prot: [29]######## S17 SSDK init succeeded! ########_athrs17_mac0_intf SGMII doneathrs17_reg_init:done955x_SGMII::athr_gmac_sgmii_setup DoneSetting Drop CRC Errors, Pause Frames and Length Error frames Setting PHY...Phy setup CompleteADDRCONF(NETDEV_UP): eth0: link is not readydevice eth0.1 entered promiscuous modedevice eth0 entered promiscuous modeSET INTF MAC 0:1c-fa-68-fe-32-f4SET INTF MAC 1:1c-fa-68-fe-32-f5br0: port 1(eth0.1) entering forwarding statenf_conntrack_rtsp v0.6.21 loadingnf_nat_rtsp v0.6.21 loadingadf: module license 'Proprietary' taints kernel.Disabling lock debugging due to kernel taintath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, 11D)ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reservedath_dfs: Version 2.0.0Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reservedath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reservedath_ahb: 10.0.107 (Atheros/multi-bss)check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.Enterprise mode: 0x43fc0000Restoring Cal data from Flashcheck DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.ath_get_caps[5863] rx chainmask mismatch actual 7 sc_chainmak 0ath_get_caps[5838] tx chainmask mismatch actual 7 sc_chainmak 0check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.SC Callback Registration for wifi0wifi0: Atheros ???: mem=0xb8100000, irq=2ath_pci: 10.0.107 (Atheros/multi-bss)ath_pci_probeath_pci 0000:01:00.0: ath DEBUG: sc=0x87aa7ce0 ol_ath_pci_configure : num_desired MSI set to 0 Using PCI Legacy Interrupt__ol_ath_attach: ath_attach TODOol_ath_attach() BMI inited.ol_ath_attach() BMI Get Target Info.ol_ath_attach() TARGET TYPE: 7 Vers 0x4000002cNUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0ol_ath_attach() configure Target .ol_transfer_bin_file: flash cal data len 65535 doesn't equal to 2116ol_transfer_bin_file: Board data file AR9888v1ol_transfer_bin_file 1535: Download Board data len 2116ol_ath_download_firmware: Using 0x1234 for the remainder of initol_transfer_bin_file 1527: Download OTP data len 3572ol_transfer_bin_file 1553: Download Firmware data len 183920ol_ath_attach() Download FW. ol_ath_attach() HT Create .ol_ath_attach() HIF Claim.ol_ath_attach() BMI Done. ol_ath_attach() WMI attached. wmi_handle 86ce0000 +HWT-HWTHTC Service:0x0300 ep:1 TX flow control disabledTXRX: Created pdev 86df3a00wmi_service_ready_event_rx: WMI UNIFIED SERVICE READY event num_rf_chain : 00000003ht_cap_info: : 0000085bvht_cap_info : 338001b2vht_supp_mcs : 0000ffeawmi_ready_event_rx: WMI UNIFIED READY event ol_ath_connect_htc() WMI is readyol_ath_set_host_app_area TODOol_ath_attach() connect HTC. target uses HTT version 2.0; host uses 2.0ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080ol_ath_phyerr_attach: calledOL Resmgr Init-edol_if_dfs_setup: calledol_if_dfs_attach: called; ptr=87af3974, radar_info=87addb98ol_ath_rtt_meas_report_attach: calledol_ath_attach() UMAC attach . __ol_ath_attach: init tx/rx TODO__ol_ath_attach: hard_header_len reservation 58__ol_ath_attach: dev name wifi1SC Callback Registration for wifi1check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.VAP device ath0 created DES SSID SET= ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1 check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.Invoking ACS module for Best channel selection check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.Channel 1 average beacon RSSI 25 noisefloor -107 ieee80211_acs_find_best_11ng_centerchan chan: 1 beacon RSSI + weighted noisefloor: -189Channel 6 average beacon RSSI 8 noisefloor -107 ieee80211_acs_find_best_11ng_centerchan chan: 6 beacon RSSI + weighted noisefloor: -206Channel 6 average beacon RSSI 8 noisefloor -107 ieee80211_acs_find_best_11ng_centerchan chan: 6 beacon RSSI + weighted noisefloor: -206Channel 11 average beacon RSSI 9 noisefloor -107 ieee80211_acs_find_best_11ng_centerchan chan: 11 beacon RSSI + weighted noisefloor: -205ieee80211_acs_find_best_11ng_centerchan found best 11ng center chan: 6 rssi: -206check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.ieee80211_dfs_cac_start[267] ===NON DFS chan === 2437check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.ieee80211_dfs_cac_start[267] ===NON DFS chan === 2437check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.athr_gmac_ring_alloc Allocated 3520 at 0x86dfd000athr_gmac_ring_alloc Allocated 3520 at 0x87ae4000955x_GMAC: eth0 in RGMII MODEScorpion -----> S17 PHYathrs17_reg_init_wan doneSetting Drop CRC Errors, Pause Frames and Length Error frames Setting PHY...ADDRCONF(NETDEV_UP): eth1: link is not readydevice eth1 entered promiscuous modecheck DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.ieee80211_dfs_cac_start[267] ===NON DFS chan === 2437device ath0 entered promiscuous modebr1: port 2(ath0) entering forwarding state ieee80211_ioctl_siwmode: imr.ifm_active=918144, new mode=3, valid=1 check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.br1: port 2(ath0) entering disabled state DEVICE IS DOWN ifname=ath0 DEVICE IS DOWN ifname=ath0check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.ieee80211_dfs_cac_start[267] ===NON DFS chan === 2437br1: port 2(ath0) entering forwarding statecheck DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.br1: port 2(ath0) entering disabled statebr1: starting userspace STP failed, starting kernel STPcheck DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.check DDR Activity - HIGHar9300_set_reset: Scorpion SoC RTC reset done.ieee80211_dfs_cac_start[267] ===NON DFS chan === 2437br1: topology change detected, propagatingbr1: port 2(ath0) entering forwarding stateisCountryCodeValid: EEPROM regdomain 0x52ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080ath_ioctl: SIOC80211IFCREATE CALLEDwmi_unified_vdev_create_send: ID = 0 VAP Addr = 1c:fa:68:fe:32:f2:TXRX: Created vdev 86f6ee00 (1c:fa:68:fe:32:f2)VAP device ath1 created TXRX: ol_txrx_peer_find_add_id: peer 86f60400 ID 129TXRX: ol_txrx_peer_find_add_id: peer 86f60400 ID 145Setting vdev param = f, value = 1ol_ath_vap_set_param: VAP param unsupported param:80 value:1ol_ath_vap_set_param: VAP param unsupported param:35 value:0 DES SSID SET= ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1 OL vap_stop +wmi_unified_vdev_stop_send OL vap_stop -STOPPED EVENT for vap 0 Setting vdev param = 1a, value = 1Setting vdev param = 3, value = 100Setting vdev param = d, value = 1Setting vdev param = 12, value = 1Setting vdev param = 1e, value = 1OL vap_stop +wmi_unified_vdev_stop_send OL vap_stop -STOPPED EVENT for vap 0 OL vap_start +OL vap_start -ol_vdev_start_resp_evol_ath_vap_join: join operation is only for STA/IBSS modeset channel freq 5745 WMI channel freq=5745, mode=a band_center_freq1=5775ol_if_dfs_configure: calledol_if_dfs_disable: calledol_ath_wmm_update:ieee80211_dfs_cac_start[267] ===NON DFS chan === 5745Setting vdev param = 3, value = 100Notification to UMAC VAP layerFIRMWARE:75 C ,5401 M 1f 5775 2f 9744 408 device ath1 entered promiscuous modebr1: topology change detected, propagatingbr1: port 3(ath1) entering forwarding state ieee80211_ioctl_siwmode: imr.ifm_active=131738, new mode=3, valid=1 wmi_unified_vdev_stop_send STOPPED EVENT for vap 0 br1: port 3(ath1) entering disabled stateol_ath_vap_set_param: VAP param unsupported param:32 value:0ol_ath_vap_set_param: VAP param unsupported param:121 value:1 DEVICE IS DOWN ifname=ath1 DEVICE IS DOWN ifname=ath1ol_ath_vap_set_param: VAP param unsupported param:32 value:0ol_ath_vap_set_param: VAP param unsupported param:32 value:0ol_ath_vap_set_param: VAP param unsupported param:32 value:1ol_ath_vap_set_param: VAP param unsupported param:74 value:1 Group Keyidx set=1 wmi_unified_vdev_install_key_send Setting Key for Macaddress:0xf232fe68fa1c Keyix=1 Keylen=16 Keyflags=1 Cipher=4 Keydata=0x71 0xdd 0x9c 0x85 0x11 0x96 0x2a 0xd5 0x2d 0x82 0xfa 0xac 0x1a 0x96 0xa7 0x3d ol_ath_vap_set_param: VAP param unsupported param:74 value:0TXRX: ol_txrx_peer_find_add_id: peer 86f60400 ID 114TXRX: sec spec for peer 86f60400 (1c:fa:68:fe:32:f2): mcast key of type 6Setting vdev param = 1f, value = 1OL vap_stop +wmi_unified_vdev_stop_send OL vap_stop -STOPPED EVENT for vap 0 OL vap_start +OL vap_start -ol_vdev_start_resp_evol_ath_vap_join: join operation is only for STA/IBSS modeset channel freq 5745 WMI channel freq=5745, mode=a band_center_freq1=5775ol_if_dfs_configure: calledol_if_dfs_disable: calledol_ath_wmm_update:ieee80211_dfs_cac_start[267] ===NON DFS chan === 5745Setting vdev param = 3, value = 100Notification to UMAC VAP layerFIRMWARE:75 C ,5401 M 1f 5775 2f 8624 238 br1: topology change detected, propagatingbr1: port 3(ath1) entering forwarding stateFWLOG: [32170] WAL_DBGID_SECURITY_ENCR_EN ( )FWLOG: [32170] WAL_DBGID_SECURITY_MCAST_KEY_SET ( 0x1 )wmi_unified_vdev_stop_send STOPPED EVENT for vap 0 br1: port 3(ath1) entering disabled stateOL vap_stop +wmi_unified_vdev_stop_send OL vap_stop -STOPPED EVENT for vap 0 OL vap_start +OL vap_start -ol_vdev_start_resp_evol_ath_vap_join: join operation is only for STA/IBSS modeset channel freq 5745 WMI channel freq=5745, mode=a band_center_freq1=5775ol_if_dfs_configure: calledol_if_dfs_disable: calledol_ath_wmm_update:ieee80211_dfs_cac_start[267] ===NON DFS chan === 5745Setting vdev param = 3, value = 100Notification to UMAC VAP layerFIRMWARE:75 C ,5401 M 1f 5775 2f 8624 238 br1: topology change detected, propagatingbr1: port 3(ath1) entering forwarding statefuse init (API version 7.12)usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) DriverPort Status 1c000004 ath-ehci ath-ehci.0: ATH EHCIath-ehci ath-ehci.0: new USB bus registered, assigned bus number 1ehci_reset Intialize USB CONTROLLER in host mode: 13ehci_reset Port Status 1c000000 ath-ehci ath-ehci.0: irq 3, io mem 0x1b000000ehci_reset Intialize USB CONTROLLER in host mode: 13ehci_reset Port Status 1c000000 ath-ehci ath-ehci.0: USB 2.0 started, EHCI 1.00usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 1 port detectedPort Status 1c000000 ath-ehci1 ath-ehci1.1: ATH EHCIath-ehci1 ath-ehci1.1: new USB bus registered, assigned bus number 2ehci_reset Intialize USB CONTROLLER in host mode: 13ehci_reset Port Status 1c000000 ath-ehci1 ath-ehci1.1: irq 3, io mem 0x1b400000ehci_reset Intialize USB CONTROLLER in host mode: 13ehci_reset Port Status 1c000000 ath-ehci1 ath-ehci1.1: USB 2.0 started, EHCI 1.00usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 1 port detectedSCSI subsystem initializedInitializing USB Mass Storage driver...usbcore: registered new interface driver usb-storageUSB Mass Storage support registered. GPL NetUSB up!kc 86 : run_telnetDBGDServer start kc 223 : init_DebugD endINFO1758: NetUSB 1.184, 0002061F : May 7 2012 10:35:23INFO175A: AUTH ISOCINFO175B: usbcore: registered new interface driver KC NetUSB General DriverINFO0076: init proc : PAGE_SIZE 4096INFO17B4: Check mac addressINFO162C: infomap 8668c220 INFO162F: sleep to wait br0 to wake upINFO02D0: use dev Name br0 INFO1638: sleep to wait br0 end.INFO1651: UDP_BROAD 7437 tcpPort:625868800 INFO02D0: use dev Name br0 INFO1538: tcpConnector() started...955x_GMAC: qca955x_soc_gmac_set_mac_duplex 955x_GMAC: qca955x_soc_gmac_set_link DoneADDRCONF(NETDEV_CHANGE): eth1: link becomes readybr1: topology change detected, propagatingbr1: port 1(eth1) entering forwarding stateEnet:1 port1 up955x_GMAC: enet unit:1 is up...eth1 SGMII 1000Mbps full duplex955x_GMAC: qca955x_soc_gmac_set_mac_duplex 955x_GMAC: qca955x_soc_gmac_set_link Done955x_GMAC: done cfg2 0x7215 ifctl 0x0 miictrl ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyINFO1415: Bind to br0 2b1af7f3a8